Clear fault codes and monitor DPF status in BMW vehicles
Bimmer-Tool empowers you to read and clear fault codes, initiate DPF regeneration, access live engine data, and perform many other diagnostics for BMW cars.
For vehicles with a model year below 2008, application functionality is limited. A K+DCAN USB cable connection is recommended for these models. Wireless ELM adapter connections with pre-2008 cars may not be possible, or certain functions may be unavailable.
Important: This application requires a reliable OBD adapter. We recommend using a K+DCAN cable, an ENET adapter (for F/G series), or one of the following Bluetooth adapters:
- Vgate vLinker MC/FS/BM/FD https://www.vgatemall.com/products/
- UniCarScan UCSI-2000/USCI-2100: Choose setting: D-Can mode: MODE2 https://www.wgsoft.de/shop/obd-2-komplettsysteme/unicarscan/114/unicarscan-ucsi-2000-diagnoseadapter
https://www.bmdiag.co.uk/unicarscan-ucsi-2000-bluetooth-obd2-adapter
- Carista https://caristaapp.com/adapter
- Veepeak OBDCheck BLE https://www.veepeak.com/product/obdcheck-ble
The application allows you to:
- Read DPF regeneration status and detailed information
- Request DPF regeneration
- Reset DPF adaptation values (required after filter replacement)
- Read exhaust gas pressure
- Read injector adjustment values
- Read actual and expected values for air mass, intake manifold pressure, and fuel pressure
- Log data to a CSV file for further analysis
- Register a battery replacement (without changing battery properties)
- Reset lamp circuits blocked due to short-circuit errors
- Reset oil and brake service intervals**
Supported OBD Adapters
- K+DCAN USB: This is the recommended and most reliable adapter. You will also need a USB-OTG cable.
- ENET Cable/WiFi Adapter: Recommended for F & G series. For ENET cable connections, you additionally need a USB-C to Ethernet adapter.
- ELM327 Bluetooth: Bluetooth connections may be slower than USB. Only genuine ELM327 or PIC18-based adapters will work. It may not be compatible with older engines. More info below.
- ELM327 WiFi: Similar to ELM Bluetooth, the connection may be less stable. On some devices, mobile data transmission must be disabled to use the WiFi adapter.
If you have any questions or need assistance, please email me. You can find our address at the bottom of the page.
Quick Start Guide
1) Connect the adapter to the OBD II socket.
2) Turn the ignition on.
3) Connect the adapter to your phone:
* USB: Connect the adapter to your phone using a USB-OTG cable. Your phone will prompt you to select an app—choose the Bimmer-Tool app.
* Bluetooth: Go to your phone's Bluetooth settings. Search for devices and pair with the adapter (PIN is usually 0000 or 1234).
* WiFi: Turn mobile data off. Turn WiFi on and search for available networks. Connect your phone to the adapter's WiFi network.
4) Start the app, go to 'Car', and select your model and year.
5) Go to 'Connection' and choose the connection type, adapter type, and communication protocol.
6) Tap the 'Connect' button.
**Limitations:
For models below 2008 and the e46/e39/e83/e53 chassis, the app requires a K+DCAN cable connection and only supports the engine ECU. Connection via a wireless ELM adapter may not be possible.
Common Problems
- Engine 'No response' error in cars up to 2007 with a BT/WiFi adapter. If this error occurs intermittently, try selecting the ATWM option under advanced connection settings.
- No connection: If the adapter and protocol settings are correct but the app still cannot connect to the car, try force-stopping all diagnostic applications in your phone's application manager (including Bimmer-Tool), or restart your phone and attempt the connection again.
Why does this app require permissions?
- Storage: Required for USB adapter support.
- Photos / Media / Files: Allows the creation of CSV files.
- Pair with Bluetooth devices / access Bluetooth settings: Required for Bluetooth adapter support.
- Full network access: Required for WiFi adapter support.
- Approximate location: In theory, Bluetooth can be used to find an approximate location, but this app does not read or use location data.
What's New in the Latest Version 3.7.6-L
Last updated on Nov 10, 2024
Diesel idle speed adjustment
Throttle body control
